Myone: Automatic pedestrian doors
Are there any NCF readers in the Myone product range?
Yes, the selector/programming device AQA is equipped with a built-in NFC reader.
Is it possible to use the smartphone as an NFC transmitter?
Yes, it is possible to use the smartphone, but the NCF transmission from the smartphone is not unique. This reduces the security of the installation.
Is the maintenance signal visible only through the selector/programming device AQA or is it possible to connect a LED light directly to the automation?
The maintenance signal is generated by closing a contact, so it is visible both through AQA, a LED light and other devices.
Does the interlock function between two automations, for safe access or energy saving, need an additional relay or is it possible to set it up through any logics in the control unit?
The interlock function can be set up directly through the logic INK in the control unit.
Can Myone automations be integrated to the Benincà BeMOVE system?
Yes, BeMOVE works with radio transmission and reception, so it is possible to integrate Myone automations through the Benincà receiver ONE.2WB or Benincà g.Move module in order to receive a feedback about the status of the automation.
How many slave devices can be managed with a CP.LUCE control unit?
The control unit can manage two groups of automations, for a total of 4.
Can the device AQA be wired up to more automations?
AQA is unique for each automation. In case the control unit was connected to other control units through master-slave connections, then AQA will manage up to 4 automations.
Can Myone automations be used for emergency exit?
Yes, there are two possible solutions. The former is the installation of anti-panic kits, that mechanically allow the “breakthrough” of the leaves, the latter is the use of the model LUCE-R namely the certified redundant automatic door for emergency exit.
What kind of radars can be installed? Bircher, Bea, Optex, Hotron?
All radars can be installed in Myone automations.
Can photocells be installed in the automation?
Yes, photocells can be connected through cables to the terminal board J15
What kind of customisation can be applied to the automation through the personalisable inputs?
The dedicated terminal board for personalisation is J4 with +/- 24 Vdc inputs and outputs. Applications can be varied, some examples are air knife, fire alarm, people counter, thermal scanner, buzzer etc…
Is it advisable to leave the selector/programming device AQA to the final customer?
Yes, the device can be programmed with different levels of security. You can set an alphanumeric password or use an NFC card to have access to the programming. In this way, the end customer will have access only to the selection of operating modes of the automation.
Can the data of an automation be copied through a USB stick onto other Myone automations?
Yes, through a USB stick you can download the configuration of an existing automation and copy it onto one or more Myone automations.
If a card is programmed as master, can it be used only for a device or for multiple ones?
The master card can be used with multiple automations, there are no restrictions.
Can radars be configured only for the entrance or only for the exit?
It is possible to set up the operating modes of the automation through the selector.
Which electric lock should be installed? Central or lateral?
The choice of the electric lock depends on the kind of installation; both carry out their task correctly. Unlike the central lock, the lateral model allows the partial opening with lock of the leaf.
Can I use Benincà transmitters to open and close the automation?
Yes, it is possible to use Benincà transmitters by connecting a Benincà receiver ONE.2WB to the control unit CP.LUCE.
